Furnace maintenance

Furnace maintenance doesn’t have to be a daunting task. If you follow these simple tips, you can keep your furnace running smoothly and avoid costly repairs down the road.

Keeping your furnace in good working order can reduce energy costs, increase efficiency, and prolong the life of your system. It also helps you maintain your warranty.

Read More: This Scottish Renewable Energy Company is here to revolutionize the Energy Sector of Pakistan

Change the Filter

furnace repair Lubbock, TX, is important to keep your furnace running efficiently. It also helps to prevent your system from becoming clogged with debris and dirt that can lead to costly repairs or even an early replacement.

Changing the filter is one of the easiest and least expensive steps to maintain your furnace. How often this task needs to be performed varies from house to house, but typically it’s necessary at least once per month.

Your home’s furnace has a filter that traps dust, pollen, and other airborne particles before they can enter your home. It also keeps your air clean and comfortable. Changing your filter regularly will help improve air quality in your home, reduce energy bills, and keep your HVAC system running smoothly.

Clean the Blower

One of the most important components in a furnace is its blower. A clogged blower can cause the unit to work harder and use more energy, increasing your heating bill.

A clogged blower also reduces efficiency and may affect your overall system life. This is why it’s important to clean your furnace regularly, which can save you money over time and extend the lifespan of your system.

To clean the blower, start by turning off your unit and removing a panel on the front of your furnace. Depending on the model and installation, this panel will be secured on hooks or with screws.

Once the panel is removed, you can gain access to the blower by sliding it out from its track. Don’t touch the counterweights or wires when removing the blower; be sure to use a vacuum to remove dust from the blades.

Clean the Combustion Chamber

Whether your furnace is oil-powered or gas, you must regularly clean the combustion chamber. Soot, dirt, and water vapor build up here and can affect your burners and pilot lights.

To do this, first shut off the electrical power and fuel supply to the furnace. Locate the power switch, typically near the unit’s exterior, and the fuel shutoff valve (on an oil-powered system, it’s usually near the oil tank; on a gas-fueled unit, it’s on the incoming gas pipe).

Remove the access panel over the blower compartment and vacuum out the chamber. Richard also inspects the exhaust flue pipe for holes that could leak carbon monoxide and adjusts its barometric damper, which moderates chimney draw.

Check the Thermostat

thermostat is a central control that regulates the temperature in your home. If it is broken, it could quickly lead to discomfort and a significant amount of energy wasted.

You can check the thermostat for problems by performing a few simple tests. These tests will help you determine if your thermostat is the cause of the problem or if it needs replacing.

First, open the thermostat cover and blow or brush any accumulated dust. This can interfere with the thermostat’s ability to send signals to the furnace.

Next, remove the screws that hold the thermostat in place. Once removed, look at the wires connecting to each terminal.

You should see the Red and White wires, standard colors for power and heat. Twist the bare ends of these two wires together. This will bridge the wires and have the same effect as turning on a switch.